Jul 23, 2016

How to Flash Stock Rom using Qualfast Flash Tool

Here are the instructions to flash Stock Rom or any Custom Rom using the Qualfast Software on Windows Computer.

Requirements: Your Android Smartphone should have at-least 30-40 percent of Phone Battery to perform the Flashing Process.

Flash Stock Rom using Qualfast Tool Software

Step 1: Download and install Android USB Drivers on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Device.
Step 3: Now Enable AP Mode on your Android Smartphone. To Enable AP Mode: Press and Hold Power Key and Volume Up Key for 5-8 Seconds until AP Mode is enabled.

Step 4: Now, Connect your Smartphone to the Computer using USB Cable.

Step 5: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 6: Download and Extract Qualfast Software on Your Computer. After Extracting you will be able to see the following files:

Step 7: Now Open Qualfast_1.0.1.exe.

Step 8: Once Qualfast Software is launched, Click on the Set Path Button from the Right.

Step 9: Now, Locate the Firmware Folder (that you have downloaded for your Device in Step#5).

Step 10: Once you have added the Rom correctly, the AP Path in the Qualfast Software will be set automatically and the Info Boxes will become Blue.

Step 11: Now, Press on the OK Button to begin the Flashing Process.

Step 12: Once Flashing Process is completed, you will be able to see Green Box.

Step 13: Now, Close Qualfast Software on your Computer and Disconnect your Smartphone from the Computer.
Step 14: Restart Your Device.

How to Flash Stock Rom using Qualfast Flash Tool Rating: 4.5 Diposkan Oleh: Admin